AZZA Guardian Glass Benutzerhandbuch Seite 13

ARGB Control Board
Connect LED button
Connect MB
SATA
If the ARGB control board connected to the mainboard ARGB pin header.
Press the LED button for 3-6 seconds meanwhile the white light flash twice to switch the
control function to the motherboard sync. Software;
Press the LED button for > 6 seconds meanwhile the white light flashes four times to turn off
the LED lights. When the LED lights are off, press the LED button for 1 seconds to turn on
the LED lights.
Press LED button to select different ARGB 13 modes
LED
Press
If the ARGB control board connected to the mainboard
ARGB pin header
LED
Press 3-6 secs
13
Different ARGB modes
Turn off the light
LED