VEVOR KW1200 Handbuch Seite 6

OPERATING INSTRUCTION
Installation Preparation:
1. Please prepare a carpet or mat to protect your floor. You need to spread
out all the accessories.
2. Please prepare gloves to avoid being scratched by sharp parts that may
occur during installation.
3. Please open all the boxes to check that the accessories are complete
and in good condition.
4. If you need to use power tools to install this product, please set the
speed to low speed in advance.
5. When installing, please align all the holes and do not tighten all the
screws first ; otherwise, it may make the installation difficult.
Installation:
Drill holes (Ф11mm) in the brackets to be installed, according
Step1.
to the winch base dimensions.
Install the winch on the brackets and lock it with bolts and nuts.
- 5 -