VEVOR KW1200 Handbuch Seite 3

1. Never overload!
2. This winch is designed for pulling, not for lifting!
3. Never put your hand or anything else near the gear, rim and rolling
cable. Always wear gloves when using the winch
4. Never try to repair or disassemble the winch when there is a problem.
Ask a machinist or specialist for help.
5. When replacing the cable, make sure that the end of the cable comes
through the 4 holes on the side of the rim, and tie a knob or weld the tip
of cable, to prevent the cable from coming out.
6. Use grease for axis and gears before depositing for a long time
7. Do not allow minors to use and operate this product
8. Do not use the product when you are tired, or while under the influence
of alcohol, prescription medicines or drugs.
9. Safety at work
- Use both hands when transporting the product.
- Use proper protective equipment according to the work
environment.
- Keep proper footing at all times and balance.
- Do not attempt to pull stationary or fix loads.
- Do not apply any side force on the load.
- Not for lifting loads and Never transporting persons.
10. Avoid starting the product unintentionally .The ratchet switch
should always be fully engaged.
CAUTION: Carefully read instructions and procedures for safe operations.
SAVE THESE INSTRUCTIONS
GENERAL SAFETY RULES
Please read this user manual carefully！
- 2 -