* ADJUSTING OF HEAD SECTION LEVER, WITH GAS SPRING
Raffaello 250174D
To control the extension and compression of the gas spring, pull the control lever positioned under the respective table
section.
Lift or lower the applicable table section until it has reached the desired tilt position. Release the lever gradually to get the
section into the desired tilt position. Abrupt release will lock the section instantly.
NOTICE! USE OF THE GAS SPRING DURING ALL FUNCTIONS:
N.B. To avoid injury to the practitioner and the patient, hold and tilt the concerned table section with one
hand before activating the lever for the gas-spring assisted tilt regulation, to prevent the section from
springing back to its original position
* WHEELS: Wheels to be used only to displace or shift the table.
Use your tiptoes of your foot to lift, or the sole to press down, the wheel control lever
ST-09-045-EN – Rev.5 January 2023 - MANUAL 250174D e 250177 RAFFAELLO e MICHELANGELO
(4) Double click on button "4" to adjust the return to the horizontal
position of the patient surface
Michelangelo 250177
3
Page 7