Classification And Use - Sporttec Raffaello 250174D Anleitung

Use: The treatment table is particularly suited for the rehabilitation and physiotherapy sectors but can be used in
many other professional contexts. The table must be installed following the EMC guidance specified below.
! Do not use the product in a different way than its intended purpose.
! Report any serious incidents that occur due to the device. Report the incident to the manufacturer and the
competent authority.
A back-up battery *(1) is not installed. Therefore the table is safe to use in all contexts, except for hospitals and
environments where emergency procedures may require continued operation of the table in case of power supply
interruption.
The table is safe to use in highly frequented environments, even around young people, as a function-lock feature is
present on all versions.
The Trendelenburg function is not a feature present on all versions
Electric motor timing: every 18 mins, 2 mins pause
*(1) The backup-battery is an optional feature that can be installed, only in its original version, by the
manufacturer.
Ferrox treatment tables are classified Class I medical devices, as implemented by the (UE) regulation 2017/745 of
the EUROPEAN PARLIAMENT AND COUNCIL on Apr 5, 2017.
ST-09-045-EN – Rev.5 January 2023 - MANUAL 250174D e 250177 RAFFAELLO e MICHELANGELO
II.CLASSIFICATION AND USE
"RAFFAELLO" Cod. 250174D
"MICHELANGELO" Cod. 250177
⎯ Applied part, type B (IEC)
⎯ Electrical insulation: class II
⎯ Grade IPX6
⎯ RAFFAELLO
Safety work load: horizontal 160 kg
Safety work load: vertical 160 kg
⎯ MICHELANGELO
Safety work load: horizontal 160 kg
Safety work load: vertical 160 kg
⎯ Padding and covering type 1-IM
⎯ Without back-up battery*(1)
⎯ With lock function
Page 4