A) TABLE WITH ELECTRIC PUSH-BUTTON CONTROL (INHIBITOR SWITCH)
CONTROL ACTIVATION:
(I)
To activate: move the little bar from left to right,
-
(O)
-
To deactivate: pull the bar outwards
- Press the "ON" button to turn on the handset (green light comes on
N.B. The handset must be activated before each use
The handset will switch off automatically after 5 seconds of no activity
B) ADJUST THE HEIGHT AND ANGLE OF THE SURFACE TO BEST SUIT THE PATIENT'S NEEDS:
3
1
ST-09-045-EN – Rev.5 January 2023 - MANUAL 250174D e 250177 RAFFAELLO e MICHELANGELO
IV.CONTROLS AND CONFIGURATIONS
UP: double click on button "1" to adjust the maximum height
(1)
DOWN: double click on button "2" to adjust the minimum
(2)
height
4
(3) Double click on button "3" to adjust the vertical position of
2
the patient surface
HEIGHT RSETTING
1
BY HAND SWITCH CONTROL
SETTING OF THE INCLINATION BY HAND
2
SWITCH CONTROL
SETTING THE HEAD SECTION BY LEVER WITH
GAS SPRING
3
Green light on
O
)
I
ON
Page 6