STEP 3:
Clean the lid with a damp cloth
STEP 5:
Remove the 3 protective rubbers.
STEP 7:
Close the filter again by turning the panel clockwise
On the filter, tighten the screws and replace the
protective rubbers.
STEP 9 :
Close the lid and press and hold the on/off button for 10 seconds. The beep that indicated filter replacement will now
be switched off.
7. CLEANING
- Use Self-Cleaning Mode to clean the container:
Make sure the appliance is switched off.
Fill the container with a 2/5 water.
Press the on/off button and select Self-Cleaning Mode
Press on-off button for 3 seconds
The appliance now starts cleaning.
- The container can also be cleaned by removing it from the appliance and rinsing it under running water. Make sure
the container is completely dry before replacing it.
- Only clean the appliance with a damp cloth.
.
21
STEP 4:
Remove the screws from the filter.
STEP 6:
Open the filter by unscrewing the panel
Anti-clockwise and replace the carbon.
STEP 8:
Place the filter back in the lid by turning this
clockwise. Make sure that the arrows on the
lid and the filter are opposite each other.