Werbung
Verfügbare Sprachen
Verfügbare Sprachen
RESTORE
TO
FACTORY
Hold the Play/pause button for 5-8 seconds to restore to factory setting. It will clear all pairing records
from the speaker. After restoring vou need to connect it to your Bluetooth device manually as you did the
first
time.
SLEEP MODE
The Splash speaker will go into Sleep Mode if it does not pair with any device through
minutes to help save battery power. Once paired over Bluetooth,
into Sleep Mode within 15 minutes. When ready for use, press the power button to turn it on,
IMPORTANT
TIPS
Pleaseconfirm the charging port gap is perfectly sealed before you put it into water. Do not leave it in
water for over half an hour. It's better to wipe the speaker with a dry cloth after taking it out from water
and wait for the water inside to dry before recharging it.
TROUBLESHOOTING
Problem
Recharge failure.
Bluetooth transmit range.
The sound from the speaker
is intermittent.
EU REGULATIONS
RED Declaration of Conformity
We, Shenzhen Value in Act'lon Technology Co., LTD.
Hereby, Shenzhen
Value in Action Technology
compliance
with
the
2014/53/ElJ. The declaration of conformity could be downloaded at: tronsmart.com/user-manual.html
CAUTION
RISK OF
EXPLOSION
IF BATTERY
INSTRUCTIONS.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
SETTING
Solution
use a different charging cable and retry.
Confirm there is no obstacle between the speaker and your Bluetooth device. Wall, human body
or other large obstacles may block or decrease Bluetooth signal transmission.
Try it in an open area to confirm the speaker performs well without possible interfere from Wi-Fi
or other kind of 2.4GHz frequency signal sources.
essential
requirements
IS REPLACED
BY AN
if nothing is played the speaker will go
Co., LTD. declares
and other
relevant
INCORRECT
TYPE
DISPOSE
03
Bluetooth within S
that this Bluetooth
provisions
of
the
OF
USED
BATTERIES
speaker
is in
RE Directive
ACCORDING
TO
Werbung
