Herunterladen Diese Seite drucken

Starlyf CLIMATE CONTROL Bedienungsanleitung Seite 7

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 24
-Do not force discharge, recharge, disassemble, heat above 158°F (70°C)
or incinerate. Doing the contrary may result in injury due to leakage or
explosion causing chemical burns.
-Make sure batteries are installed correctly according to polarity (+ and -).
-Do not mix new and used batteries, or batteries of different brands or
types, such as alkaline, carbon-zinc or rechargeable batteries.
-Remove and immediately recycle or dispose of batteries from equipment
that has not been used for an extended period of time in accordance with
local regulations.
-Always secure the battery compartment completely. If the battery com-
partment does not close properly, discontinue use of the product, remove
the batteries and keep them out of the reach of children.
Important: Starlyf® Climate Control is not an air conditioner. It does not
emit cold air; it can only function as a fan.
MAINTENANCE OF DOUBLE INSULATED DEVICES
Double-insulated devices have two insulation systems instead of
earthing. Double-insulated devices do not require a ground. Do not
add a ground to a double-insulated device. Servicing a double-insulated
device requires extreme caution and a good knowledge of the system and
should only be performed by qualified personnel. Replacement parts for
double-insulated devices must be identical to the parts they replace. Dou-
ble insulated devices are labelled as 'CLASS II' or 'DOUBLE INSULATED'.
They are also identified by the double insulation symbol.
2- SET INCLUDES
1 x Starlyf® Climate Control
1 x remote control
1 x remote control holder
1 3M Sticker
1 x set of installation accessories
1 x instruction manual
(A)
3. INSTRUCTIONS FOR USE AND ASSEMBLY
HOW TO INSTALL ON THE WALL (B)
Your appliance must only be used in a fixed position and must be installed at least 1.80 m from the floor
(Please observe the installation instructions below).
Drill 2 holes in the wall at a distance of 29,5 cm from each other. (1)
Place the dowel into the hole with a hammer. (2)
Screw the screw inside the socket. (3)
Mount the Starlyf® Climate Control safely and securely. (4)
USING THE MAIN UNIT CONTROL PANEL
Plug the Starlyf® Climate Control into a 220-240V outlet.
The product can be operated manually via the unit's control panel or by remote control.
For manual operation: (See picture A)
Click the ON/OFF button (1) once and the HEAT function will be activated. The led light (8 ) will light up
when it is in heat mode.
7

Werbung

loading

Verwandte Produkte für Starlyf CLIMATE CONTROL