Operation Steps Of Pressure Gauge; Specifications; Problems & Fix - Oasser Rcp-B67T Benutzerhandbuch

English

Operation Steps of Pressure Gauge

1. Press the red button to pop up the pressure gauge.
2. Connect the pressure gauge to the tire valve to test the current pressure.
Note: When the gauge is taken out from the air compressor, "+" "-" on the
compressor will not be responsive.

Specifications

Rated Voltage: DC 12V
Rated Power: 120W
Max Current: ≤10A
Max Pressure: 80PSI
Inflation Efficiency: 6min for a 195/65R15 tire from 0 to 35PSI
Consecutive Working Length: 30 minutes below 35PSI
Pressure Units: PSI / BAR / KPA
Accuracy: ±1.5PSI
Working Temperature: -10℃ ~ +60℃
Accessories: 1pcs nozzle, 1pcs ball adapter, 1PCS Presta Valve
Problems & Fix
1. Press Power Button but compressor is not turned on.
Fix:
● Please check if the power cord is good in condition, if connection is ok, and if
adapter accessory is ready.
3