FDS OP70052 Bedienungsanleitung Seite 9

● If the product comes with support cushions at the sides, do not
stand or sit on the cushions.
Hint: Air leak from the seams is necessary because the product is
inflated by constant air flow and this leakage is required to stop
the product becoming over-inflated.
Hint: It is drawn user's attention to the orientation of the inflatable
equipment installation in relation to the sun. The sliding surface of
the product shall not face to the sun as sunshine can glare the
children's eyes when they are sliding down along the slide.
TAKE DOWN
● Make sure all children exit the product.
● Make sure the product is free from foreign objects.
● If the product comes with water bags, please follow the
undermentioned instruction, otherwise, overleap this point.
Detach the water bags from the product. Remove the product and
blower before opening the stopple for draining.
Empty water in the water bags and dry them in cool place for next
time's use.
● Turn the blower (air pump) power switch to OFF.
● Unplug the blower (air pump) power cord.
● Loosen the hook & loop fastener and detach the inflation tube
from the blower.
● The product should deflate on its own within 5 minutes. Make
sure the product is entirely deflated. (refer to picture H)
● Remove ground support stakes.
16
● Fold the product in half from both ends, and then fold it in half 2
more times from both sides, vertically to the first fold. (refer to
picture I, J, K)
● Roll it up tightly from the end opposite the inflation tube. (refer
to picture L, M)
● Slip the carry bag over the folded product and stakes (plastic
balls or water bags). Zip the bag. (refer to picture N)
MAINTENANCE
■ Checks and maintenance of the main parts of the toys should
be carried out at regular intervals, if these checks are not carried
out , the toys could overturn or otherwise become a hazard.
Whenever practical, the instructions shall also be affixed to the
toy.
■ The seasonal inspection and maintenance should be conducted
for any damage or leakage of the product.
■ The product can be wiped clean with a mild detergent. Keep
water away from the blower (air pump) at all times.
■ Do not store the product when wet. Store the product and the
blower indoors in dry conditions when not in use.
REPAIR
In case of any breakage of product, please patch up through hand
sewing. Each type of product is provided with a repair kit which
includes six pieces of cloth (in three colors;each color has two
pieces) and three 20-meter long threads of different
colors.Sewing needles are not provided and you should purchase
by yourself (3# sewing needle is suggested).
17