Using A Memory Card; Technical Specifications - Modecom Freetab 1002 Schnellstartanleitung

MODECOM FREETAB

8. Using a memory card

3.1 Insert the micro
• The device supports
• To insert the card, set the connector
unit (printed toward the back of the unit)
• To remove the card, press the edge of the card to release the card
to release the safety and pull the card out of the slot
Warning: When you load a file with the micro SD card, it can not be
removed from the slot and can cause
4. Pairing Tablet with the Bluetooth
To pair your tablet with a Bluetooth Keyboard, turn on Bluetooth
module in your tablet, then turn on the keyboard by holding "OFF/
ON" button for two seconds
tablet is on)
The next step is to press "Connect" button on the keyboard (LED
status indicates communication mode activation flashing constantly)
In the tablet click "Search for devices"
tooth bookmark which is in the upper right corner),
going to be found automatically. Please click found device, one-time
access code will appear (4 digits), the code must be entered, confirm
by pressing "Enter", the device will be connected.

5. Technical Specifications

Procesor
Operating system
Memory RAM
Memory Flash
www.
SD memory card to the device
micro SD cards in standard SD / SDHC
a malfunction
(LED status indicates
Quad Core AW A31s,
GHz; CPU: PowerVR
Android 4.2
IGB DDR3
8GB Flash MLC
modecom.
tab toward the front of the
Keyboard
by flash that the
(button is located in Blue-
the keyboard
ARM Cortex-A7 4 x Core
SGX 544 MP2 8 x Core
eu
is
1.0