Herunterladen Diese Seite drucken

LEGO Technic 8482 Bedienungsanleitung Seite 12

Werbung

Some Important
Information
The LEGOS'Software on this Disc is the result of a great
deal oi work, To help us bring you high quality programs in
the future it is importanc as a legal requirement to read the
following:
First
Rule;
Following the purchase of the LEGO program you are
permitted co copy the program to your own computer.
However, it is illegal to allow ocher users to gain access to
your programeitåer via the Internetor by uploading the
programto a network from whichit canbe copied.It is
not a problem should you lose the original but havethe
programcopiedon your computer,
Second
Rule:
If you sell or passthe program en it is illegal to use the
program yourself. It is also illegal to lend or rent computer
programs.
It is importantto know that the LEGOtrademarksshould
not be used freely,An
or a
the name as being a trademark.
If you need co know anything else about the legal
requirements. then more informacion can be found on the
CD*ROM. If you are connected to the Internet you can
also look at our homepage
more
information
about
LEGO Group.
CyberMaster contains a patented protocol,
following a name *dentifies
hctp;//www.LÉGOcomfor
the use of the trademarks
l)
Hardware assembly
Putting a 9-uolt battery
1.
2.
Fitting
a.
turning
into place.
3.
Connecting
a.
b.
of the
Putting
4.
unit
a.
b.
c.
Fitting
5.
a,
Jorn che Tower
unit
so that the back of the unit
faces upwards. Press gently on the battery cover
and push down and away from you.
Insert one 9Volc battery, as illustrated in che
picture.
Slide the battery cover back into place
Checorrect position.
aerials
on the Tower
Aerials are fitted onto che top of the unit
a clockwisedirection screwsthem firmly
the Tower
Unit to your
Thé cable is connected
at the bottom
the Tower
Unit.
The cable which
is now connected
unit should be linked up to a frec serial port on
your PC. If it is a 9-pin serial port, the cable Can
be connected directly
hand.it is a as-pin port, usethc enclosed
converter. see Fig.3b.
six 1.5-volt
batteries
Tu
the Mobile
unit
so that the back Of the unit
faces up. Press gently on the battery cover and
push to the right, as shown on the illustration,
Insert s ix 1.5Voyt batteriesvas illustrated inthe
pléture.
Slide the battery cover back into place—it Will
click into the correct position.
aerials
on the Mobile
Aerials are fitted
the -top Of the Mobile
unit
turning in a clockwise direction screws
them firmly into place.
in the Tower Unit
it will
unit
PC
rear of
to the Tower
the PC. If, on 'the other
in the Mobile
Unit

Werbung

loading