Werbung
Learn
mode
How to set upper and lower ideal position
Set the upper position
We recommend
to set the upper position first, then the lower position. You can always restan the position setup process
by unplugging
the power and follow the steps below again.
Unplug and connect
the power
The machine
rises
to the
ideal upper setting
Set the lower position
Note: The lower position setting is set without beep/alarm
Press
the
DOWN
button
once and complete within
5 seconds
Press
the
SETTINGS
button
once (alarm release)
Press
the
SETTINGS
button
(Backside of remote)
Press the
STOP
button
The
machine
descends
to
the lower setting
The lower position
is set successfully
www.multibrackets.com
Upper position
The machine will always beep
alarm
sound
the
lower
limit
has
been deleted successfully when
leaving the factory, enter the
lower limit to re-adjust
If the ideal height is not reached
it can be fine tuned by pressing
the up and down keys on the
remote
control
initiation.
Press
the
STOP
button
It will now automatically
between the two positions
Lower position
Press
the
UP
button
Press
the SETTINGS
once (a short beep is heard)
The upper
limit
is set
successfully
If the lift has not
reached your ideal
position, you can press
the UP and DOWN keys
to jog fine adjustment
move in
button
6.
Werbung
