Sublue WhiteShark MixPro Bedienungsanleitung Seite 8

3
Reading the User Manual
Before use, please read this user manual carefully and be familiar with all the
operation and precautions.
4 Start
Take your MixPro to explore the underwater world now.
Before use, you should be familiar with product performance in an absolutely
safe water environment and fully master its operations.
Operation Instructions
1
Operation
Left Start Button
6
Right Start Button
Safety Lock Button
Instructions
Item
Press and hold the left start
button for 3 seconds. The
Power on
product will be on after the
indicator light turns on
With the product turned on,
press the left and right start
Operating
buttons at the same time to
operate it
1. Press the left and right start
buttons at the same time to
Speed
run the product
switch
2. Quickly tap on the right
button twice and then hold it
Release the left and right start
Stop
buttons at the same time, or
operating
release a start button on
(standby)
either side to stop operating
Turn the safety lock to the
Lock
position of lock sign
The product will
automatically shut down
Power off
without any operation in 10
minutes
If you don't use or carry the product, it is recommended that lock and keep it safe, to
prevent from accidentally operating due to squeezing the start button, causing personal
injury or damage to the product.
Photo Remarks
3s
The start speed is
"low" by default.
LED indicator is
always on
The twice tap interval
2 press
is about 0.5s.
Switch between high
and low speed.
Enters standby mode,
and LED indicator
flashes
LED lights turn off
7