Line-In Function - Ace Instruments Alpha Bedienungsanleitung

WEARING METHOD:
1 2
1. Pay attention to distinguish between left and right earpho-
nes (the front of the monitoring pickup or the switch knob
is on your left side), and use both hands to pull apart the
earphones on both sides with appropriate force.
2. Headband of the earphone is placed on the top of the
head, and both ears are completely placed in the earpho-
ne cover. 、
3. Adjust the length of telescopic handle until it is comfort-
able to wear!
MONITORING FUNCTION:
Functional features: This pro-
duct captures the sound in the
environment through a high-
sensitivity listening pickup,
and after being processed, it
is restored by using a speaker
in the earphone. It has stereo
sound, no time difference, high
fidelity, wide sound range and
low power consumption.
ACE_Alpha_Bedienungsanleitung_03-2022.indd 16-17 ACE_Alpha_Bedienungsanleitung_03-2022.indd 16-17
3
16
Usage method: After wearing headphones correctly, turn the
„monitor switch and volume adjustment knob" to the right.
After clicking, the headphones are powered on. Continue to
rotate to adjust the monitor volume from small to large.
Turn the „monitoring switch and volume adjustment knob" to
the left to adjust the monitoring volume from large to small. Af-
ter the sound is turned to „click", the earphone is powered off.
Introduction of monitoring threshold function: The monitoring
function of the earphone is combined with the function of au-
tomatically cutting off the threshold for protecting hearing. Af-
ter the monitoring function is turned on, if the ambient sound
is greater than or equal to 82db, the threshold function is star-
ted, and the monitored sound is automatically cut off; When
the ambient sound is less than 82db, the threshold function is
turned off and monitoring is resumed.

LINE-IN FUNCTION:

Usage method: Use the attached 3.5mm audio cable, con-
nect the headset with your playback device, and turn on the
monitor switch.
Note:
1. The monitoring is mixed with the line-in input. If you need
a pure line-in input effect, you can turn down the volume
of headphones and turn up the volume of playback equip-
ment.
2. The LINE-IN function is not affected by the monitoring
threshold function, that is, the automatic interception is
started, and the line-in function still works normally.
17
29.03.2022 12:08:18 29.03.2022 12:08:18