AZZA Pyramid 804L Benutzerhandbuch Seite 11

200 mm PCI-E 3.0 Cable (Supports EATX, ATX Motherboard)
To fix potential compatibility issues with PCI-e Gen 4.0, please connect your graphics card
directly to the motherboard, enter the BIOS, and change the PCI-e x16 mode to 3.0 before
using the RGB PCI-e cable.
PCI-E 4.0 Version
4.0 The latest 4.0 version provides faster transmission speed
This extension cable supports the following graphics cards: RTX 3000 series, RTX 3080, RTX
3090 FE, RX 5700XT and RX 6000 GPUs.
Please note before use:
1. Measure the distance between your motherboard, PCI-E slot and GPU connection to
confirm whether the length of this 4.0 cable is sufficient.
2. Update your motherboard BIOS to the latest version.
3. Update your GPU software to the latest version.
4. Check whether the motherboard BIOS setting is 4.0. Some software will not switch
automatically. If the switching fails, the PC will not start normally.
11