Cleaning And Maintenance - Royal Catering Rcbl-25Enc Bedienungsanleitung

Programmable switch.
Default setting: run at speed level P3 for 30 s (counting down time from 25 s). While it is
activated, speed can be adjusted by touching " +˄ " and " -˅ ". Wait for counting down to stop
or touch " P1 " to stop. Temporary time setting won't be saved.
Do-it-yourself operations:
1. At stand-by mode, touch " P1 " and hold for 3s to enter timer setting, number of timer will
P1
flash on the display.
2. Touch " +˄ " and " -˅ " to adjust timer from 5 to 300 s, touch power switch to quit without
saving the setting or touch " P1 " to save timer setting and turn to speed setting, number of
speed level will flash on the display.
3. touch " +˄ " and " -˅ " to adjust speed from level P1 to P9, touch power switch to quit
without saving the setting or touch " P1 " to save speed setting, " End " will be displayed to
confirm the programming is done. The appliance returns to stand-by mode.
Programmable switch.
Default setting: run at speed level P6 for 60 s (counting down time from 55 s). While it is
activated, speed can be adjusted by touching " +˄ " and " -˅ ". Wait for counting down to stop
P2
or touch " P2 " to stop. Temporary time setting won't be saved.
Do-it-yourself operations:
Refer to above described operations for " P1 ", follow the same procedures to do settings for "
P2 ".
Programmable switch.
Default setting: run at speed level P9 for 120 s (counting down time from 115 s). While it is
activated, speed can be adjusted by touching " +˄ " and " -˅ ". Wait for counting down to stop
P3
or touch " P3 " to stop. Temporary time setting won't be saved.
Do-it-yourself operations:
Refer to above described operations for " P1 ", follow the same procedures to do settings for "
P3 ".
Reset " P1 " " P2 " " P3 " to default setting:
At stand-by mode, touch " +˄ " and " -˅ " at the same time and hold for 3 s, a beep will be given to confirm
resetting is done. The appliance will turn to power-on mode.
• In order to prolong motor's service life, do not exceed 2 minutes when running at max speed. After
allowed max full speed run turn it off for 2 min to let it cool down. Do not overload it.
Switch off the motor and wait until the motor comes to a complete stop before removing the
•
container.
• If the appliance is equipped with magnet switch on the noise cover, the motor will automatically shut
down when the cover is opened during operation.
Unplug the appliance from the outlet when not in use.
•

Cleaning and maintenance

a) Always remove the plug from mains before cleaning the appliance.
b) Never immerse the appliance in water or any other liquid!
c) Clean the outside of the appliance with a damp cloth (water and a mild detergent).
d) Never use aggressive cleaning agents and/or abrasives. Do not use any sharp and/or pointed objects.
Do not use petrol or solvents! Clean with a damp cloth and a mild food grade detergent if necessary.
Do not use abrasive materials.
e) Never immerse the container in water or any other liquid! The container must be cleaned, rinsed and
dried immediately after each use.
f) Cleaning the mixing container:
• Pour water and a mild detergent into the mixing container.
• Place the lid onto the container.
Place the container on to the motor unit.
•
• Switch the motor unit on at full speed for 10-20 seconds.
• Switch off the motor.
Remove the container from the motor unit.
•
EN