Young Living VIYA DIFFUSER Bedienungsanleitung Seite 10

Cleaning and Maintenance
Always turn o and unplug the di user prior to cleaning. To ensure proper
performance, clean the ultrasonic plate and lid after each use. If essential
oil begins to build up on the ultrasonic plate, gently rinse it o using warm
water and alcohol. If essential oil begins to build up on the lid, gently wipe it
o using mild soap and water only. Never use a corrosive detergent to
clean the ultrasonic plate or damage will occur. Periodically check under
the di user to keep the fan intake free of debris. Debris can be removed by
blowing on the fan intake opening or wiping with a clean, dry cloth. (Do not
use aerosol sprays, solvents, or abrasives to clean the plastic housing .)
When not in use, clean the di user and store dry.
Troubleshooting
When switched on, the di user does not operate. (Potential issues: power
connection, water above water fill line marker)
• Check that the adaptor is securely plugged into the wall socket and the
rear of the di user.
• Check that water is in the reservoir and it is not above the red water fill
line marker. If there is too much water, unplug the unit and adjust the
water to the red water fill line marker and restart. The light should come
on, and the di user should mist.
9
Notice:
When emptying the
water reservoir, pour
water from the
opposite side of the
base ventilation hole.