Declaration Of Conformity; Safety Notes; Warranty Information; Related Servonaut Products - Servonaut Rm12 Bedienungsanleitung

be used in combination with a master
receiver. For further information see
section "Partner mode with multiple re-
ceivers" on page 21 or 23.
Status-LED
(On or Off)
Note: You need a HS12 or HS16 with at
least software version 2.4 change this
option.
With this setting you can deactivate the
LED on the channels. If deactivated val-
ue changes of the channels are no long-
er indicated by the LEDs.
Attention: This setting has no effect if the
receiver is turned on in bind-mode
(jumper is not plugged in)!

Related Servonaut Products

R+4
• Extends the receiver to 16 channels
• with the R+4 servos are powered
through the RM12
TastB
• bind push button
• can be used instead of the jumper for
easier binding of the model

Declaration of Conformity

Hereby, tematik GmbH declares that the
radio equipment type RM12 is in compli-
ance with Directive 2014/53/EU. The full
text of the EU declaration of conformity is
available at the following internet address:
http://www.servonaut.de.

Safety Notes

Do not expose the module to water or oil.
Do not cover it with foam. Disconnect the
battery immediately after use. Do not con-
nect the battery with wrong polarity. Avoid
any short circuits. Always use caution
when connecting the battery. Always turn
on the transmitter first.

Warranty Information

Warranty is granted for one year from date
of purchase. This warranty does not cover
damage due to incorrect handling or wir-
ing, over voltage or overloading. This war-
ranty does not cover consequential,
incidental or collateral damage under any
circumstances. By the act of using this
product the user accepts all resulting liabil-
ity.
Subject to change without notice.
04/2024 Software V1.0
28