Binding & Double Binding Receiver And Radio; Temperature Sensor - Servonaut Rm12 Bedienungsanleitung

Binding & Double binding
Receiver and Radio
You can bind two radios to one RM12.
So two people can take turns driving
one model - without repeatedly having
to bind their radios.
Binding the first radio
• RM12 is disconnected from the battery
remove jumper on Bind
• switch on the RM12
• press Bind on your radio
If the running light on the RM12 turns
off it is transmitting normal.
at last reinsert the jumper on Bind
19
Attention: If you want to bind a
second radio the steps are in
different order!
Binding the second radio
• RM12 is disconnected from the battery
• remove jumper on Bind
• switch on the RM12
Attention: now insert the jumper
• at last activate Bind on your radio
Important: Only the first radio deter-
mines if a channel is used as a mul-
tichannel. To avoid errors choose the
same settings for both radios.

Temperature sensor

Instead of the jumper bind you can also
connect a temperature sensor RM-T.
The data can be viewed on the Servo-
naut radios HS12 and HS16 (starting
from software version 2.4). For binding
you then have to disconnect the sensor.