Preparation; Instructions - Tab R6 Benutzerhandbuch

PREPARATION

1
Remove the clean water
tank from the body.
3
Install the clean water tank
into the body.
5
Fix the hose and power cord
before handling.
05
2
Open it and fill with clean water.
Maximum water level
4
Insert the brush into the handle.

INSTRUCTIONS

1
Plug in it.
3
Turn on the power to start.
Turn on
5
Press the water spray button
to spray clean water.
Water spray button
Spray the stain with clean water to let it surface.
Do not spray continuously at the same spot.
After spraying, absorb the water, so as not
to cause mildew and odor.
2
Turn on the main switch.
Turn on
4
Select suction power or
water temperature.
Suction switch
button
Temperature
switch button
Notice：Please spray the residual water in the pipe
before spraying hot water.
06