Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
3. Blue light: it indicates that it is necessary to substitute the filter. After changing it, press
the settings button 3 times in succession. The blue light will remain on for 3 seconds and
then it will turn white (if there is not enough water, it will turn red). This will reset the
filter lifespan (the default filter lifespan is 30 days).
4. If the filter needs to be changed and there is not enough water, the red light will switch on
first. Once water has been added to the tank, the indicator light will turn blue. When the
filter is changed, the light will return to white.
5. LED light on: it indicates that the pump has been stopped via the app.
-
LED white light on: it indicates that the water fountain is operating normally.
-
Red LED light on: it indicates that there is not enough water.
-
Blue LED light on: it indicates that it is necessary to substitute the filter.
Settings button
1. If you press the button once while the appliance is operating normally, it will continue to
operate, and the indicator light will remain on.
2. To connect to the Wi-Fi network, press the button for 3 seconds; the indicator light will
flash white intermittently and the device will automatically enter the network connection
mode. When the device has successfully connected to Wi-Fi, the indicator light will stop
flashing and the water fountain will resume its operation.
3. If you want to connect to a new Wi-Fi network, press the button for 3 seconds. The water
fountain will disconnect from the previous network and the app, and re-enter automatic
connection mode. If it fails to connect, it will resume connection to the application and the
previous network after 5 minutes.
4. Press the button for 10 seconds in any state; the white light will flash intermittently for 3
seconds, and the product will return to the default setting. Before returning to the default
settings, the water fountain will resume operation. If you want to control the water
fountain via the app, you will need to reconnect the product to the Wi-Fi network.
UVC light (for UVC version and Wi-Fi version)
1. Every 4 hours, the UVC light is switched on for half an hour to purify the water and
remains off for 3.5 hours.
2. When the water fountain is switched on, the magnetic sensor activates the UVC light.
3. If you remove the filter tray when the fountain is switched on, the magnetic sensor
will not be able to detect the magnetic fields, so the UVC light will remain off to avoid
accidents caused by direct exposure to sunlight.
38
PUMBA 2500 REFRESH SMART
Werbung
