cecotec PUMBA 2500 REFRESH SMART Bedienungsanleitung Seite 37

3. PRODUCT ASSEMBLY
1. Insert the pipe into the upper connector of the water pump. Fig 4.
2. Place the filtration cartridge on the bottom of the filter tray to assemble the filtration
assembly. Fig. 5
3. Assemble all accessories in order (top to bottom: water fountain tray, filter tray,
filtration cartridge and pipe). Fig. 6
Plug in the USB adapter. The assembly process is complete. Fig. 7
4.
4. OPERATION
1. Remove the water fountain tray and the filter assembly. Fig. 8
2. Fill the tank with drinking water. Do not exceed the maximum water level (MAX). Fig. 9
3. Next, replace the filter assembly and the water fountain tray. Fig. 10
4. Connect the USB adapter. The product is ready for use. Fig. 6
APP connection
*The appliance only supports 2.4 GHz Wi-Fi.
- By means of the following QR code you will be able to access:
- The APP download
- The instruction manual
- Operating instructions and connectivity via the APP
- Cecocare access
Indicator light
1. White light: it indicates that the water fountain is operating normally.
2. Red light: it indicates that there is not enough water. The water pump stops working. It
will resume operation when the water level is above the MIN mark.
ENGLISH
PUMBA 2500 REFRESH SMART
37