CSL RMP-900 Bedienungsanleitung Seite 8

4. Start-up
Take the device out of the packaging and remove all packaging material. Then
connect the microphone to a USB port on your computer. The device is now ready
for use.
4.1 Mung the Microphone
The "Mute" switch allows you to mute and unmute the microphone.
4.2 Adjusng the Microphone Volume
On the boom of the device are the "Decrease volume" and "Increase volume"
buons. With these buons you can adjust the microphone volume as desired.
5. RBG LEDs
An RBG mode buon is integrated on the boom of the device. Press the buon
to change the RBG mode.
6. Windscreen
8
The microphone can be
equipped with a windscreen
(pop screen). Aach the wind-
screen as shown in the picture.
Please note that the wind-
screen only provides limited
protecon against wind inu-
ences or blowing!
English