Sharp CE-103M Bedienungsanleitung Seite 4

Module Installation
Installation
Installation according
@ Turn the power of the PC-5000 Portable Computer off.
@ Use a coin or screwdriver to remove the screws,and
then remove
PC-5000 Portable Computer.
Note: The
installed
@ Remove the CE-103M Memory Module from its hard
cases, and remove the rubber terminal
@ Insert the module into SLOT 1. Slide it firmly onto
the connectors.
base of the
@ Replace the slot cover.
and removal
to the following
the cover to SLOT
CE-103M Memory
in SLOT
Be sure to slide it all the way to the
terminals.
procedure.
1 on the
Module
2.
cap.
back of the
cannot be
3