Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.3. Working with the unit
After connecting to the proper power source, turn the device on using the switch (B) located on one of the
device sides. You can also change the lighting mode using the same switch:
•
Position " " - backlight off.
•
Position " " - intense blue light (apart from visual effects, it has a positive impact on the rooting
and tillering of aquarium plants)
•
Position " " - mixed daylight (predominantly neutral white with accents of blue, violet, green,
and red - in addition to visual effects, it impacts the mood and vitality of aquarium fauna)
3.4. Cleaning and maintenance
a)
Pull the mains plug and let the unit cool down completely before cleaning, adjusting, or replacing
accessories and when the unit is not in use.
b)
Use only non-corrosive cleaning agents for cleaning the surfaces.
c)
Do not spray the unit with a stream of water or immerse it in water.
d)
Make sure that no water enters through the ventilation openings in the casing.
e)
Clean the ventilation openings with a brush and compressed air.
f)
Use a soft cloth for cleaning.
g)
Do not use sharp and/or metal objects (e.g., a wire brush or metal spatula) for cleaning, as these may
damage the surface of the material from which the unit is made.
h)
Do not clean the unit with acidic substances, medical products, diluent, fuel, oil or other chemicals as
this may cause damage to the unit.
EN
Werbung
