hillvert HT-WEDGE-FT6W Bedienungsanleitung Seite 12

f) The device is not a toy. Cleaning and maintenance may not be carried out by children without
supervision by an adult person.
g) It is forbidden to interfere with the structure of the device in order to change its parameters or
construction.
h) Keep the device away from sources of fire and heat.
i) Do not cover the ventilation openings!
ATTENTION! Despite the safe design of the device and its protective features, and despite the use of
additional elements protecting the operator, there is still a slight risk of accident or injury when
using the device. Stay alert and use common sense when using the device.
3. Use guidelines
The product is designed to illuminate open tanks. It is equipped with appropriately selected diode colors
ensuring proper light to the aquarium flora and fauna.
The user is liable for any damage resulting from unintended use of the device.
3.1. Device description
B. ON/OFF and operating mode switch (on the side of the device - not visible in the picture)
3.2. Preparing for use
POSITIONING OF THE UNIT
The ambient temperature must not exceed 40°C and ambient humidity should not exceed 90%. Place the unit
in a way that ensures good air circulation. Maintain a minimum clearance of 10 cm from any wall of the unit.
Keep the unit away from any hot surfaces. Always operate the unit on a stable, fireproof surface and out of the
reach of children and persons of impaired mental, sensory and intellectual functions. Place the unit in such a
way that the mains plug can be reached at any time. Ensure that the power supply to the unit corresponds to
that specified on the identification plate!
ASSEMBLY OF THE UNIT
Install the device on an open aquarium - in order to adjust it to the given aquarium size, extend or slide the
device's legs (see the two pictures below) so that the product, resting on the edges of the aquarium side walls,
is well-fitted to them at the same time.
ATTENTION: The extendable legs are not equipped with stops; therefore, for safety reasons, they must be
extended and adjusted before mounting the product on an aquarium! They can be connected to the power
supply only after installation and adjustment of the product.
EN
A. Mounting legs