DragonTouch Vision 3 Pro Bedienungsanleitung Seite 16

EN
8. Frequency: Auto, 50Hz, 60Hz
Default setting is Auto.
9. LED Indicator Light: Off / On
Default setting is On.
10. Screen Saver: Off, 10s, 20s, 30s, Close
Default setting is 30s.
Turns off the LCD display after a period of inactivity to save battery life. To turn on the LCD
display again, press any button on the camera.
11. Power Save: Off, 1minute, 3minutes, 5minutes
Default setting is 3minutes.
Powers off your Vision 3 pro after a period of inactivity to save battery life.
12. Date Stamp: Off / On
Default setting is On.
If you turn on Date Stamp, this camera adds date stamp to the video and photos you take.
13. Sound: Off / On
Turn on of off the key sound.
14. Language: 简体中文, 繁體中文, English, 日本語, Deutsch, Français, Italiano, Español
Default setting is English.
15. Date-Time: MM-DD-YYYY HH-MM-SS
16. Format: Format Card? Confirm / Cancel
To keep your memory card in good condition, reformat it on a regular basis. Reformatting
erases all of your content, so be sure to offload your photos and videos first.
17. Reset to Factory: Confirm Reset to Factory? Confirm / Cancel
This option resets all settings to their default values.
18. Firmware Version
Model: Vision 3 Pro
Manufacturer: DragonTouch
You can check the model, version, updated time and manufacturer of your Vision 3 Pro.
14