DragonTouch Vision 3 Pro Bedienungsanleitung Seite 14

EN
The files will be saved every 3 MIN if you choose the 3 MIN option. When the memory
card is full, the new files will cover the old one if loop recording is on. If it is off, the camera
will not record anymore when the card is full. You will then need to format the memory
card or change to a new memory card.
5. Slow Motion Video: 1080P 60FPS, 720P 120FPS
Default setting is 720P 120FPS.
Slow motion is an effect in film-making whereby time appears to be slowed down.
Note: Slow motion video is captured without audio.
6. Image Stabilization: On / Off
This setting adjusts the footage to offset for motion during capture.
7. Photo Resolution: 20MP , 16MP , 14MP , 12MP , 8MP , 5MP
Default setting is 20M.
8. Self-timer: Off, 3S, 5S, 10S, 20S
Default setting is Off.
Timed gives a delay between pressing the OK release and the OK's firing. It is most
commonly used to let photographers to take a photo of themselves (often with family).
9. Continuous Lapse: Off, 3S, 10S, 15S, 20S, 30S
Default setting is Off.
Turn on Continuous Lapse, this camera takes continuous lapse photo.
10. Burst Photo: Off, 3P/S, 5P/S, 10P/S
Default setting is Off.
Burst Photo captures up to 10 photos in 1 second, so it is perfect for capturing
fast-moving activities.
General Setting
1. Exposure: -3, -2, -1, 0, 1, 2, 3
Default setting is 0.
By default, your camera uses the entire image to determine the appropriate exposure level.
However, Exposure lets you select an area that you want the camera to prioritize when
12