DragonTouch Vision 3 Pro Bedienungsanleitung Seite 15

EN
determining exposure. This setting is particularly useful in shots where an important region
might otherwise be over- or underexposed.
When you change this setting, the LCD display immediately shows you the effect on your
image. If you change modes, the camera returns to using the entire scene to determine
the correct level of exposure.
2. Housing Mode: OFF/ ON
Default setting is OFF.
In video mode, press and hold the shutter button for 3s to switch camera node when the
camera is in the waterproof case.
3. White Balance: Auto, Sunny, Cloudy, Incandescent Light, Fluorescent Light
Default setting is Auto.
White Balance lets you adjust the color temperature of videos and photos to optimize for
cool or warm lighting conditions. When you change this setting, the LCD display
immediately shows you the effect on your image.
4. Angle: 170°, 140°,110°, 70°
Default setting is 170°.
5. Diving Mode: Off / On
Default setting is off.
Turn on Diving Mode, it can compensate for the lack of red light in underwater scenes.
Diving Mode is designed to be used in tropical and blue water, optimized for use between
10 and 80 feet.
6. Image Rotation: Off / On
Default setting is Off.
This setting determines the orientation of your video or photos to help you prevent upside
down footage.
7. Driving Mode: Off/ On
Default setting is Off.
If you turn on driving mode and connect camera with car cigarette lighter, the camera will
turn on automatically if you start your car and will turn off if you stop your car.
13