Werbung
Verfügbare Sprachen
Verfügbare Sprachen
To use W200 SkyBot
Switch
on/off
Turn on the power
SkyBot, then put it on the window
glass.
Start W200 SkyBot
l). Make sure the edge of W200
SkyBot is 8cm or more away
from
window
frames
before cleaning.
2). Press the Start/Pause
to start
clean.
Stop/Pause
1). When W200 SkyBot is cleaning,
robot
to stop it.
2). When W200 SkyBot is cleaning,
it.
Users can also operate
Take W200 SkyBot back after cleaning
W200 SkyBot will return to its starting
finished. There is voice
l). Use remote
2). Press Start/Stop/Pause
you to take it off;
3). Hold the hand grip, the safety rope and take it off from the window;
4). Pull the CUPUle release ring, take the cupule
5). Clean the pads and dry it for future Use.
WARNING:
Do not pull the cupule
switch
on W200
or corners
button
W200 SkyBot with remote
prompt when cleaning
control to move W200 SkyBot to a reachable
button for 2 seonds, the robot will remind
release
> 8cm
> 8cm
press Start/Stop/Pause
press Start/Stop/Pause
point automitically
ring during
cleaning.
12
Mamibot
Mamibot
O
button
button
control.
after cleaning
finished.
location;
off.
W200 Skvso'
CORDLESS
O
on the
to pause
Werbung
