Troubleshooting - Telefunken SA101BR2 Bedienungsanleitung

7.

TROUBLESHOOTING

Problem
EN
Appliance does not
work.
No sound.
Bad audio quality.
Remote control
does not work.
Appliance does not
react to pressed
buttons.
Possible cause
Power cord (9) not connected
properly.
Volume is set too low.
Sound is muted.
Settings at the source device
are not correct.
Bad Bluetooth reception.
Connecting cables are not
inserted correctly.
Battery empty or not correctly
inserted.
Distance between appliance
and remote control is too big.
Malfunction due to
electrostatic discharge.
Solution
Check if the power plug is properly
connected to an electrical outlet.
Increase the volume level.
Restore sound by pressing
Ensure that the external source has correct
volume settings and is playing a track.
Shorten the distance between the
Bluetooth device and the appliance and
make sure no obstacles are disturbing the
connection.
Ensure that the connector cables to the
source device are correctly plugged in and
plugs fully inserted.
Check that the battery is correctly inserted
or, if necessary, replace.
Reduce the distance between the remote
control and the sound base and make sure
there are no obstacles between them.
Aim the remote directly at the Infrared
receiver on the sound base.
Disconnect the appliance from the power
supply.
Connect the power cord
electrical outlet.
30
(24).
(9) again to an