Connections; Connection Principle; Using The Optical Socket; Using The Coaxial Socket - Telefunken SA101BR2 Bedienungsanleitung

4.

CONNECTIONS

4.1

Connection principle

Make sure the power cord
EN
„
connection.
During operation, if the cables/wires require to be reconnected, the power plug
„
be disconnected first. Otherwise damage to the appliance may result.
4.2

Using the optical socket

Use an optical cable (not included) to create a digital connection to a TV, DVD, Blu-Ray
„
player or other suitable devices.
Connect an optical cable (not included).
„
OPTICAL
Note: In order to receive digital signals, you need to activate PCM (Downmix) in the
„
settings menu of your source device.
The digital optical cable or connector might be labelled as SPDIF OUT or OPTICAL OUT.
„
4.3

Using the coaxial socket

Connect a coaxial cable (not included).
„
Note: In order to receive digital signals, you need to activate PCM (Downmix) in the
„
settings menu of your source device.
Optical cable
(not included)
COAXIAL
(9) is disconnected from the electrical outlet before making any
Coaxial cable
(not included)
24
OPTICAL
COAXIAL
(9) must