Ronix RP-U100 Bedienungsanleitung Seite 21

the surface, working from the bottom upwards.
- Avoid allowing the rinsing water to run on to unwanted surfaces.
STORAGE
- Switch off the washer.
- Turn off the water supply tap.
- After use, the detergent residuals should be removed from the tank.
- Discharge residual pressure by pressing the trigger until no more water
comes out of the lance nozzle.
- Engage the gun safety lock.
- Remove the plug from the socket.
- Operate the washer with non-corrosive /non-toxic antifreeze before
storing for the winter.
WARNING!
BEFORE REUSING, COMPLETELY FLUSH THE UNIT OUT WISH
PLAIN WATER. ANTI-FREEZE CAN DAMAGE PAINTWORK SO YOU
MUST ENSURE THERE IS NO ANTI-FREEZE LEFT IN THE SYSTEM
BEFORE USING IT AGAIN.
MAINTENANCE
CAUTION:
Before working on the washer, disconnect the lug from the power
supply socket.
- to ensure good performance. check and clean the suction and
detergent filters after every 50 hours of operation.
19
User Manual