Bluetooth Mode - Thomson Rt850Bt Bedienungsanleitung

Use

Bluetooth mode

You need to carry out several steps to connect your mobile phone:
1. Activate Bluetooth on your mobile phone (refer to the instructions for your phone).
2. Press the POWER button to turn on the unit, then press the MODE button repeatedly
until the LCD screen displays "Bluetooth". It will then be ready to be paired automatically.
3. Using your mobile phone, search for the Bluetooth device called "RT850BT".
4. Your mobile phone will detect "RT850BT" and ask if you want to connect.
To connect, enter the password 0000 (if applicable). Once the connection is made, the "BT"
symbol will appear on the LCD screen.
Automatic connection with your smartphone
Pairing is only necessary when you first use the appliance with the phone. Once the device
has been paired with the phone, it will connect to the appliance automatically when it is turned
on and Bluetooth is activated on the phone. The next time you turn on the appliance, it will
automatically connect to the mobile phone it was last connected to.
Press and hold the Bluetooth button to disconnect the Bluetooth function.
Playing from a Bluetooth device
▷
Once Bluetooth has been paired, press the button to play. Press the "</PREV" or ">/ NEXT"
▷
button to move to the previous or next track. To pause or resume play, press the button
again.
FM mode
Automatic search for all available radio stations:
▷
In FM radio mode, press and hold the " /SCAN" button to start the auto search function.
When the search finds a sufficiently strong radio signal, it is automatically saved. When
the end of the waveband is reached, the first station stored is played. Press "</PREV" or ">/
NEXT" to browse and select the radio stations saved.
Automatic search for the previous or next radio station:
Press and hold the "</PREV" or ">/NEXT" button for 2 seconds. The radio searches and stops
automatically when it finds a station with sufficient signal strength.
Manual search:
Press and hold the "</PREV" or ">/NEXT" button. Once you find the station you want to save,
press and hold the "MEM" button, and the screen will show the memory locations to save.
Press "</PREV" or ">/ NEXT" to move between locations, and press "MEM" to select the
required location.
- EN 19 -