Setting the clock (In Sleep mode)
1. Press
"SETUP CLOCK", press
2. Press < or > to choose the 24hr or 12hr format, then press
3. Press < or > to set the current time, press
4. Press < or > to set the current minutes, press
5. Press
to save the time setting.
Set the alarm (In Sleep mode)
1. When you need to set your clock, press and hold
2. "Alarm Setup" is displayed. Press the "
3. Press < or > to set the current time, press
4. Press < or > to set the current minutes and press
5. Press </> to set the alarm volume, press
6. Press </> to select the Alarm source (Buzzer-FM), and press
7. Press </> to adjust the alarm duration. You can choose between 15, 30, 45 and 60 minutes.
Press
to confirm.
8. Press </> to save the alarm settings.
Snooze
1. Once the alarm sounds, it can be temporarily stopped, for a period of approximately 9
minutes, by pressing the SNOOZE button once.
2. The alarm goes off automatically again after approximately 9 minutes.
3. The "Zz" symbol appears on the display to remind you that the snooze function is activated.
4. To deactivate the snooze function, press the POWER button once and release.
Sleep Timer
1. By pressing the SLEEP button several times, you can choose between 90/75/45/30/15/
OFF minutes. After that, the device will go into sleep mode. This function is useful for falling
asleep to music at night.
2. If you want to cancel sleep mode, press SLEEP repeatedly until OFF appears on the
screen
Screen backlighting
You can press the DIMMER button to adjust the brightness of the screen backlight. 3 options
are available: high, medium and low.
Use
▷
to confirm and the "24H" symbol will flash.
to confirm, and the minutes will flash.
to confirm, and "SAVE YES" will flash.
to set your Alarm.
" button to make your choice.
to confirm and the minutes will flash.
to confirm.
to confirm.
- EN 18 -
to confirm.
to confirm.