Factory Reset; Putting On The Headphones - Apw Core Pro Anc Bedienungsanleitung

INSTRUCTIONS

Factory reset

A factory reset will return the headphone settings to their default state and all your device
pairings will be erased. This may help with problems pairing your headphones. Make sure that
the Bluetooth of the mobile device to which the headphones are connected is switched off.
Put the headphones into the charging case. Press the reset button on charging case for 10
seconds. The headphones red LED will flash five times indicating successful reset.
To pair your headphones with your device, follow the instructions in the "Pairing" section.

Putting on the headphones

Insert the headphones into your ears and adjust the fit as needed to make wearing the head-
phones comfortable. The microphone should be pointed towards the mouth.
Controls
Turning On
Turning Off
Answer / end call
Reject call
Skip to next track
Voice assistant activation
Play/Pause
Game mode
Remove the headphones from the charging case. / Press
and hold the touch button for 2 seconds.
Insert the headphones into the charging case.
Press the touch button twice.
Press and hold the touch button for 1.5 seconds.
Press the right touch button three times.
Press the left touch button three times.
Press the right / left touch button twice.
Press the left touch button for 1.5 seconds.
ENGLISH 9