Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
•
Attach the drain valve connector to the drain outlet by turning
clockwise.
•
Open the outer drain plug on the inside of the pool and the
water will be drained.
•
Disconnect the hose and drain valve connector when the pool
is empty.
•
Attach the outer drain plug to the inside of the pool.
•
Make sure the pool is completely dry before folding and storing
it for long-term storage. If the pool is not completely dry, it may
lead to mould while the pool is stored.The pool and all accessories
such as the filter pump, cover, groundsheet, ladder, hoses and
legs should be stored together indoors in a reasonably warm,
dry and waterproof place.
Folding
NOTE!
Make sure the pool is completely dry before folding. It is
advised to spread some talcum powder over the pool to prevent the
vinyl from sticking together.
•
Fold the bottom of the pool into a rectangular shape (Fig. 1).
•
Fold one side in twice and do the same on the other side (Fig. 2).
•
The right and left sides touch. Fold left over right as if it were a
book being closed (Fig. 3).
•
Fold the two long sides towards the middle (Fig. 4).
•
Fold one side over the other (Fig. 5).
•
Use the original packaging to store everything and store in a dry,
cool and clean place
1
3
TIP!
While folding, remove the air inside to make the pool thin and
flat during each fold.
2
4
5
10
Werbung
