Before Installation; Tips For The Assembly Location - BROTJE RGB B Montageanleitung

4. Before installation

4.1 Tips for the assembly
location
Fig. 4: Assembly location (Assembly examples)
136 103 03.11
The following points should be observed for the assembly of the room device RGB:
- The room device has to be installed in the main common room in such a way
that the temperature measurement is not falsified by direct sunlight or other
hot and cold sources.
- In case of wall installation, sufficient clearance must exist above the room de-
vice for removing from or inserting the device in the bracket.
Room device RGB B
Before installation
GB
19