NUTRIBULLET PRO+ 1200 Bedienungsanleitung Seite 8

Assembly guide.
nutribullet cup
®
extractor blade
motor base
14 14
PULSE
nutribullet
assembly.
1 2
Add ingredients* to Place the Extractor
the nutribullet Cup.
Blade onto the
®
nutribullet
and twist until it is
tightly sealed.
4 5
Unlock the Once the Extractor
assembly by gently Blade stops
pushing and completely, remove
untwisting the cup the nutribullet
counterclockwise. Cup from the
Motor Base. Enjoy!
cup
®
SEE USER GUIDE FOR DETAILED
ASSEMBLY INSTRUCTIONS.
3
Turn the nutribullet
Cup upside down and
place it onto the Motor
Cup
®
Base. Gently push and
twist, 60-second auto
blending cycle will be
activated. The blue
light and unit will shut
off once auto-mode
is completed.
CAUTION: Do not run the Motor
Base in excess of 1 minute per
interval. Do not run the Motor
Base for more than three 1-minute
intervals without allowing it to
cool for 2-3 minutes after the third
extraction. Running the motor for
more than 1 minute consecutively
in any interval may warm the
ingredients and pressurize the
nutribullet Cup.
®
®
Friction from the rotating
Extractor Blade when extracting
can cause ingredients to heat and
generate internal pressure in the
sealed vessel. If the vessel is warm
to touch, allow to cool before
carefully opening pointed away
from your body.
®
15