NUTRIBULLET PRO+ 1200 Bedienungsanleitung Seite 5

• If the supply cord is
damaged, it must be
replaced by the
manufacturer, its service
agent or similarly qualified
persons in order to avoid
a hazard.
• CAUTION:
In order to
avoid a hazard due to
inadvertent resetting
of the thermal cut-out,
this appliance must not
be supplied through
an external switching
device, such as a timer, or
connected to a circuit that
is regularly switched on
and off by the utility.
• For your safety, do not
modify the plug or Motor
Base in any way. Doing so
will increase risk of injury
and void the product's
warranty.
• The use of third-party
attachments, including
canning jars, is forbiden
and may cause fire,
electric shock, personal
injury, or product damage
and will void the warranty.
• To avoid risk of electric
shock, never immerse
the cord, plug, or Motor
Base of blender in water
or other electrical current
conducting liquids.
Discontinue use if the
cord, plug, or Motor Base
is damaged.
• Always disconnect the
appliance from the supply
if it is left unattended
and before assembling,
disassembling or cleaning.
• Switch off the appliance
and disconnect from
supply before changing
accessories or handling
moving parts.
• Periodically inspect all
nutribulllet components
®
for damage or wear that
may impair proper function
or present an electrical
hazard. Assure that
power cord and plug are
undamaged. Discontinue
use and replace
nutribulllet Cup if you
®
detect cracking, crazing,
cloudiness or damage to
the plastic. Assure that
the blades rotate freely
and that the gasket is
seated and undamaged.
Assure that Motor Base
switch actuators are
unobstructed, clean, and
depress easily. Follow
maintenance instructions in
this user guide on pages
16-17. Never operate
your nutribulllet with
®
damaged components.
If your nutribulllet
®
malfunctions in any way,
immediately discontinue
use and contact Customer
Service.
• Do not allow the cord to
hang over the edge of
the table or counter.
Do not pull, twist, or
damage the power cord.
Do not allow cord to touch
hot surfaces, including
the stove.
• If the motor stops working,
unplug the Motor Base
and let it cool for an hour
before attempting to use
it again. Your nutribulllet
®
has an internal thermal
breaker that shuts off the
motor when it overheats.
The thermal breaker
will reset when the unit
is unplugged and the
thermal breaker cools
down sufficiently.
VENTILATION
To prevent a fire hazard,
the openings on the
bottom of the Motor
Base should be free of
dust or lint and never
obstructed as they are
provided for ventilation
to ensure reliable motor
operation to prevent over
heating. Never place
your nutribulllet on top
®
of flammable materials
such as newspapers,
tablecloths, napkins,
dishtowels, place mats
or other similar type of
materials.
• CAUTION!
Always
operate the nutribulllet
®
on a level surface, leaving
unobstructed space
beneath and around the
Motor Base to permit
proper air circulation.
Slots on the bottom of
the Motor Base are
provided for ventilation
to ensure reliable
operation and to prevent
motor overheating.
9