Digitus Plug&View Kurzanleitung Zur Installation Seite 26

Please go to "Parameters" -> "Motion Detect" on the Web UI.
Activate motion detection by clicking on "ON". The colored area
within the video image is the motion detection area, i.e. the area in
which a movement triggers a picture or a video recording. In the
original delivery condition, almost the entire screen is covered with
red boxes. Click on the color markings to exclude certain areas
from motion detection. By doing this, you delete the marker for that
area. You can set the motion detection sensitivity in "Sensibility".
Select from the following four levels: "Very high", "High", "Normal"
and "Low".
Activate "Alarm with recording" to save in case of detected motion
to SD card.
Time setting is affected via the schedule for motion detection. You
can record in Weekly, Workday or Full-time modes.
You can individually adjust the schedule.
Save the configuration with "Apply".
26