Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Adding
the camera by scanning
Complete action using
Barcode
Scanner
DIGITUS Plug&View
Use by default for this action
Clickon "DIGITUS@ Plug&View", to letthe DIGITUS@ Appscanthe
code.
Android devices show a grid on the display. Move the camera
forward or backward until the QR-code fits into the grid.
Apple
iOS devices
do not show a grid. To scan a QR-Code
Apple
iOS device, you may need to move the device backward
and forward
a couple of times, until it recognizes
Adding
the camera though manual input of MAC-
address
and activation
The
MAC-address
and the activation
page of this guide. After you have selected "add camera" in the
Plug& View App , please enter the number and letters
combinations, which you find under "MAC". Then enter your
activation
code and click "Apply".
the QR-Codes
Please select the option "Scan QR
Code" on the next page. The QR
code scan function of your mobile
device
is activated.
Should there already be one or more
apps for the scanning of QR codes
installed on your device, you will be
presented
with a pop-up selection.
with an
the code.
code
code
are located
on the last
Werbung
