PATONA RGB-188APC Bedienungsanleitung Seite 13

SCENE Mode
Group Control
Channel Control
► APP Operation Guide
• Downloading the App: Use your mobile phone to scan the QR code provided above or
search for the "RHDLight" app in Google Play (for Android) or the App Store (for Apple iOS)
and download it.
• App Permissions and Bluetooth:
○ Open the app and agree to all the required permissions and function settings.
○ If Bluetooth is not active, you will be prompted to enable it. Select "OK to turn on Bluetoo-
th" or manually activate Bluetooth on your phone (iOS devices require manual activation).
• Starting the Product: Power on the product as usual.
• Connecting to the Device:
○ In the app, tap the "+" sign to access the "device scanning" interface and begin scanning.
○ After a short wait, the device's image and name will appear (as shown in Figure 2). Tap
on it to proceed to the interface shown in Figure 3.
○ In the Figure 3 interface, tap on the "connected" status to bring up the Figure 4 interface.
○ In the top right corner of the Figure 4 interface, select the group and channel (Grp:A ch:1)
that matches your product lamp.
○ Use the tabs at the top of the app to control and adjust the product settings.
○ To unpair the device, slide "connected" in Figure 3 to the left, revealing Figure 5. Tap
"delete" to remove the device.
○ For additional help, tap the "Help" option in each interface of the app for detailed instru-
ctions.
��
Note: If the device is not detected during scanning, ensure that the product is turned on
Press Fn3 to browse and select different scenes.
Press Fn2 to select the Gr parameter and assign the light to a specific
group (A-C) for multi-light control.
Press Fn2 to select the Ch parameter and assign the light to a channel
(1-40) for wireless control systems.
Scan to download the app
12