Product Description; Standard Equipment - Elitech Rc-51 Serie Beschreibung

Product description

1
2
3
7
4
5
6
LCD screen display
A. Battery level indicator
B. Mean kinetic temperature
C. Start record indication
D. Stop recording instruction
E. Loop recording indication
F. Computer connection instructions
Code hints
USB: USB connection status
PDF: Report Generation
Operation of the recorder
1.Recorder parameter configuration:
1) Please download from elitech us: www.elitechus.com/pages/download or
elitech uk: www.elitecheu.com/pages/software or
elitech br: www.elitechbrasil.com.br Download and install the free elitechlog software
(macos and windows); (if you have already installed this software, you can ignore this
step)
2) useUSBWiring the recorder and computer,The recorder screen appears "
icon and display"USB",Open the "Jingchuang Data Center" management software,
click Enter the parameter configuration interface, enter the parameters to be
set, and click "Save Parameters" to complete the parameter configuration.;
Note:(1)Do not disconnect the recorder and the computer before the software does not
pop up a successful save prompt;
(2)After first use or after battery replacement,Be sure to configure the parameters;
2.Recorder starts recording:
3.The recorder stops recording:
4.Data viewing and exporting:
Method 1: PDF data report export:
When the logger is connected to the USB interface of the computer, it will automatically
generate a data report in PDF format and save it to a disk named "Data Logger". You can
open this drive letter and copy the generated PDF report to your computer for saving.
PDF report generation in progress
Report generation is complete
Method 2: The management software exports the data report:
The recorder is connected to the computer USB interface,Open the "Jingchuang Data
Center" management software,The recorded data will be automatically downloaded to
the computer, click
export data reports in PDF\EXCEL and other formats;
5.Repeat(again)start recording:
Method 1: When the recorder stops recording, press and hold the button for 5 seconds to
start the data recording again;
Note:If the button cannot start the recording state, please connect to the computer,
open the "Data Management Center" software, and confirm whether the repeated start
parameter is: On;
Method 2: Connect the recorder to the USB port of the computer, open the "Data
Management Center" software, and click Click
Parameters" in the "Parameters" interface,Disconnect the recorder from the computer to
start data recording again;
Note:When the record is restarted repeatedly, the last recorded data will be cleared,
please be sure to save the data before the restart;
Replace the battery
1
2
3
① Press the tab along the arrow and remove the battery cover
② Replacement battery ER14250
③ Install the battery cover in the direction of the arrow

Standard equipment

Recorder × 1 Manual × 1
Attentions
● Please store the recorder at room temperature. If the equipment is not used for a long time,
it should be packaged and stored in a dry and cool environment.
● If you are using the recorder for the first time, please use the "data management center"
software to synchronize the system time and configuration parameters.
● Before starting the recorder, please briefly press the button to confirm that the recording
and status indicator light flash once at the same time.
If the recorder is recording, do not remove the battery.
●
● LCD screen will automatically close after 15 seconds of inactivity (by default). Press the
button again to open the screen.
● Any parameter configuration on the "data management center" software will delete all data
recorded in the recorder. Please save the data before saving the new configuration.
● The user shall not change the equipment without authorization. Any unauthorized changes
may a ect the accuracy of the equipment or even damage the equipment
Please use it within the measuring range of the product.
●
● If the battery is insu cient, do not use the recorder for long-distance. transportation.
● Even if the battery is exhausted, the recorded data in the recorder can still be read.
This product uses disposable lithium battery, do not directly heat or charge.
●
Please recycle or dispose of waste products according to local regulations.
●
The warranty covers any fault caused by the product quality, transportation or manufacturing
process during normal use within one year from the date of purchase. During the warranty
period, any fault caused by the above reasons will be repaired or replaced free of charge.
The warranty does not apply if any of the following conditions are met:
1. Damage caused by accident, misuse, abuse, alteration, tampering or the buyer's failure to
comply with the specified normal operation procedures;
2. Defect or damage caused by food / liquid overflow or wrong use of power and voltage;
3. Damage, loss, defect or failure caused by natural events such as fire, flood and animal or
insect disturbance;
4. Scratches and damages of external surface area and external exposed parts caused by
improper operation of users;
5. If any part of the device is replaced with a part not supplied or approved by us, or the device
has been disassembled or repaired by anyone other than authorized technicians of Jingchuang;
6. Use products, equipment, systems, utilities, services, parts, supplies, accessories,
applications, installation, maintenance, external wiring, connectors not provided or authorized
by Jingchuang, or damage the product or cause service problems.
① Transparent cover
② USB interface
③ LCD screen
④ Sealing ring
⑤ Button + red and green indicator lights
⑥ Sensor
⑦ Product label
■▶iconNone or flashing at the same time:Recorder
standby state, wait for keypress to start recording;
On-screen countdown:Logger timing or delay status,
After the countdown,Automatically start recording;
Long press the button on the recorder 5seconds, screen
display ▶, Logger starts data logging;like ▶ Blink with
countdown,then enter the delayed start state,after
countdown,Automatically start recording;
The recorder is in the start recording state,Long press
the button on the recorder5seconds,screen display ■,
Logger stops data logging;
Enter the data chart interface, you can view the recorded data and
Factory Calibration Certificate × 1
G. Temperature Unit (°C/°F)
Humidity Units or Progress
H.
treasure percentage
I. Timing indication
J. Average Indication
K. Record number indication
Combination indication area
L.
Not alarmed
LO PO: Low Battery
rE CF: Reconfiguration Alert
the recorder is connected to the
computer
on the interface
1
, or click "Save
Quick Reset
Battery × 1
"