Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Insert battery
Turn the remote over, press the serrated area of the battery cover and pull out the battery
cover. Insert a CR2025 lithium coin cell with the positive (+) side facing up. Close the
battery compartment again.
First steps
1.
Place the digital photo frame horizontally. Connect the power adapter to a power
outlet and to the DC IN input on the right side (back) of the device.
2.
Remove the protective film in the battery compartment and make sure that a battery
is installed in the remote control. If a new battery is required, see the "Battery
Installation" chapter for details.
3.
The device starts automatically when switched on. Press POWER on the back of the
device or on the remote control to turn the device on or off.
Main display (memory card and USB device)
The device supports SD/SDHC memory cards and USB 2.0 storage media. After
connecting a memory card or USB storage medium, press the "Return" button until the
following display appears (see below). Use the arrow buttons or to select a storage
medium.
If there are supported image, music and video files on the memory card or USB storage
medium, the slide show with background music starts automatically. You can also disable
this feature from the settings menu.
5
Werbung
