Configuring The Interface (Version 1) - Selco Ri Xp Betriebsanweisung

6.2 Configuring the interface (version 1)

- Reboot the computer to activate the new settings
- Connect the interface to the computer
To restore normal network conditions, select the "Obtain an IP address automatically" option
- Enter the interface's IP address (172.18.1.100) in the "Exceptions" field
- Click "OK" to close all the windows
- Enter the interface's IP address (172.18.1.100) in the browser's
address field
- Configure the "IP address", "Subnet mask" and "Default gateway"
fields as instructed by your network administrator
- Click "Set" to confirm the settings
21