Training Computer; Main Features; Technical Data - Rebel Rba-1012 Bedienungsanleitung

TRAINING COMPUTER

1. To turn on the console, press the MODE button or start
exercising on the cross trainer.
2. The console will turn off if no signal is received for 4 minutes.
3. To reset the data on the display (except total distance), press
the RESET button or press and hold the MODE button.
4. Pressing the MODE button in pause mode changes the
displayed options for a section in the following order: time
settings, speed units settings, distance units settings, calorie
units settings, total distance units settings. Press the SET
button to change the displayed values.
5. Pressing the MODE button in operation mode changes the
currently displayed data.
6. Options available in operation mode:
• SCAN - displays all data sequentially in a loop, 6 seconds for
each option.
• TIME - displays the current exercise time. The counter works
only during exercise.
• SPEED - displays the current speed.
• DISTANCE - displays the distance covered from the
beginning to the end of a given exercise.
• CALORIES - displays the number of calories burned from the
beginning to the end of a given exercise.
• ODOMETER - displays the total distance traveled on the
device since the beginning of the exercise. When the
batteries in the computer are replaced, the distance is reset.
• PULSE - displays the total distance traveled on the device
since the beginning of the exercise. When the batteries in
the computer are replaced, the distance is reset.
22
EN
SPECIFICATION

MAIN FEATURES

• Built-in LCD display
• Transport wheels
• Heart rate sensors
• Leveling feet
• Phone/tablet holder

TECHNICAL DATA

• Equipment class: H
• Measured values: heart rate, time, speed, distance, ODO, calories
• Flywheel weight: 6 kg
• Flywheel location: rear flywheel
• Step length: 34,5 cm
• Width between bases: 62 cm
• Foot bases: adjustable
• Resistance adjustment: manual, 8 levels
• Brake: magnetic
• Bearing type: ball bearings
• Max user height: 190 cm
• Maximum user weight: 110 kg
• Display size: 128 x 59 mm
• Display power supply: 2x AAA battery
This equipment complies with the European standard EN957.
This equipment has been categorized as H operational use class and it
is designed exclusively for home use. It cannot be used as commercial,
therapeutic or rehabilitation equipment.
English
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with
separate collection systems) This marking shown on the product or its
literature, indicates that it should not be disposed with other household
wastes at the end of its working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle it responsibly to
promote the sustainable reuse of material resources. Household users should
contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take this item for
environmentally safe recycling. Business users should contact their supplier
and check the terms and conditions of the purchase contract. This product
should not be mixed with other commercial wastes for disposal.
Made in China for Lechpol Electronics Leszek Sp.k., ul. Garwolińska 1,
08-400 Miętne. serwis@lechpol.pl
23
EN