Citel PL Serie Installationsanleitung

19'' patch panel surge protector for high speed network
STP
Electrical Characteristics
Network
Nominal line voltage
Max. DC operating voltage
Max. load current
Max. data rate
Max. frequency
Insertion loss
Protection level
Following the test category C3 (IEC61643-21) - Line/Line
Max. shunt capacitance
Impulse current
2 x 10/350µs Test - D1 Category
Line/Line Nominal discharge current
8/20µs Test x 10 - C2 Category
Line/Ground Nominal discharge current
8/20µs Test x 10 - C2 Category
Mechanical Characteristics
Technology
SPD configuration
Connection to Network
Format
Mounting
Housing material
Operating temperature
Protection rating
Failsafe behavior
Disconnection indicator
Spare module(s)
Remote signaling of disconnection
Pin outs
Dimensions
Standards
Standards compliance
Part Number
10Gigabit Ethernet, Cat.6 cabling
Un
5 Vdc
Uc 8 Vdc
IL 1000 mA
10 Gbps
f 250 MHz
< 1 dB
Up
20 V
C
< 25 pF
Iimp 500 A
In L/L 500 A
In L/PE 2000 A
GDT+clamping diode
24 ports de 8 wires
RJ45 shielded female input/output
Rack 19''
Baie 19''
Aluminium
-40/+85°C
IP20
Short-circuit
Transmission interrupt
12-port PCB
no
(1-2)(3-6)(4-5)(7-8)
See diagram
IEC 61643-21 / EN 61643-21 / UL497 B / IEEE
802-3an
581515
CITEL • 2 rue Troyon • 92316 Sèvres Cedex • France • Tel: +33 1 41 23 50 23 • e-mail: contact@citel.fr • www.citel.fr
201910 • CITEL2CP-PL24-CAT6-en • Document Subject To Modifications Without Notice
PL24-CAT6
• Surge protector for CAT6
• 24 ports
• 19'' patch panel 1 U
• 100/1000/10Gigabit Ethernet network
compliance
• Connectors RJ45 shielded
• Bi-directionnel
P: 3-electrode GDT
DBC: Low capacitance diode
DATALINE